FEYNLAB® WATERLINE

FEYNLAB® WATERLINE

Product Description

FEYNLAB® WATERLINE is an innovative solution that offers extra protection for gel and clear coated surfaces from marine growth and exhaust staining. For best results, FEYNLAB® WATERLINE should be used after applying STEP 1 of our HYDRO MARINE COATING SYSTEM (for professionals) or our MARINE COAT SYSTEM (for DIY market).

PRODUCT BENEFITS

As any boat owner knows, maintaining the beauty of gel or clear coated surfaces is labor intensive and a near impossible chore without some serious chemical help, which can be toxic to both you and marine life. The constant attack by the sun, water, salt, marine growth, and exhaust quickly degrades the visuals of your boat, quickly making your expensive purchase look old and worn. This drove FEYNLAB to work tirelessly for several years developing FEYNLAB® WATERLINE.

Now, with FEYNLAB® WATERLINE, those hard to maintain areas are protected for up to 1 year. FEYNLAB® WATERLINE was originally created to protect the surfaces above water. However, in testing we found it worked great to protect the hull below the water line of boats that are dry docked and do not require bottom paint.

Utilizing anti-microbial and anti-bacterial polymers in a ceramic matrix, this wipe-on, wipe clear micro-coating keeps stains and contaminants from affecting the beauty of the boat’s hull. It also provides UV protection, makes the hull easier to clean, and easier to keep clean.

The hydrophobic properties of FEYNLAB® WATERLINE may help decrease water drag.

If you are looking for an anti-stain solution to preserve your boat against the ravages of the marine environment, look no further!

DURABILITY & APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces

Durability – 1 Year.

Approved Surfaces: DO NOT APPLY over bottom paint. NOT A SUBSTITUTE for bottom paint. Not an anti-fowling replacement.

• Gel-Coated & Painted Surfaces

 

Included

120 mL of FEYNLAB® WATERLINE

 

Cautions

We encourage to always wear a respirator & gloves when using WATERLINE.

 

Prepping the Gel Coat Surface

Directions – FOR USE AFTER STEP 1 of HYDRO MARINE or MARINE COAT Systems (RECOMMENDED)

Heavily apply FEYNLAB® WATERLINE to a FEYNLAB® Microfiber Applicator pad and wipe on areas to be coated in long straight lines. For waterline areas, apply approximately 6-8” above and below the waterline. Attempt to apply as evenly and level as possible to avoid any unnecessary towel leveling. Avoid towel leveling altogether for best results.

If optical clarity is of utmost importance, you can wipe the surface clear as you would a ceramic coating, but in doing so, you will lose film build and long-term durability.

Directions – FOR USE WITHOUT HYDRO MARINE or MARINE COAT Systems

Thoroughly clean the vessel’s surface using FEYNLAB® MARINE WASH or ECOWASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. Use FEYNLAB® F100 HEAVY CUT COMPOUND, as needed, to remove imperfections in the gel-coat or painted surface. Remove all compounding and polishing residue by using FEYNLAB® PANEL PREP.

Heavily apply FEYNLAB® WATERLINE to a FEYNLAB® Microfiber Applicator pad and wipe on areas to be coated in long straight lines. For waterline areas, apply approximately 6-8” above and below the waterline. Attempt to apply as evenly and level as possible to avoid any unnecessary towel leveling. Avoid towel leveling altogether for best results.

If optical clarity is of utmost importance, you can wipe the surface clear as you would a ceramic coating, but in doing so, you will lose film build and long-term durability.

Curing

Allow WATERLINE to sit in the sun as long as possible before the vessel leaves your work area. Do not allow boat to enter water for a recommended 7 days. Avoid chemical exposure for 7 days. Wash and maintain vessel using FEYNLAB® MARINE WASH or FEYNLAB® MARINE ECO-WASH.